Xi'an Kacise Optronics Co., Ltd.
TEL:86-29-88888109
Address:：Tangyan South Road, Xi'an
Email： sales@kacise.com
Technical Parameter
| M30-型号1 | |
| Range | 200... 2000 mm |
| Adjustable range | 200….2000mm |
| Blind spot | 0 ... 200 mm |
| Measure standard board size | 100 mm x 100 mm |
| Probe frequency | approx.150 kHz |
| Response time | approx. 10 ms |
| M30-型号2 | |
| Range | 300... 3500 mm |
| Adjustable range | 300….3500mm |
| Blind spot | 0 ... 150 mm |
| Measure standard board size | 100 mm x 100 mm |
| Probe frequency | approx.70 kHz |
| Response time | approx. 20 ms |
| M30-型号3 | |
| Range | 400... 6500 mm |
| Adjustable range | 400….6500mm |
| Blind spot | 0 ... 300 mm |
| Measure standard board size | 100 mm x 100 mm |
| Probe frequency | approx.50 kHz |
| Response time | approx. 40 ms |
M30 type 1 size structure
M30 type 2 size structure
M30 type 3 size structure
Sensor function description
There are 8 working modes for the switch output:
1. Window normally open mode (analog output products are in positive linear working mode or distance measurement mode).
2. Window normally closed mode (analog output products are in negative linear working mode or liquid level measurement mode).
3. Single point normally open mode.
4. Single point normally closed mode.
5. Single point normally open with large hysteresis interval mode.
6. Single point normally closed with large hysteresis interval mode.
7. Whether to detect normally open mode.
8. With or without detection of normally closed mode.
Analog output mode:
1. Analog voltage output 0-10V programmable.
2.Programmable analog 4-20mA output.
3. RS485 output programmable.
About RS485 output model product description
There are 3 working modes:
1. Automatic measurement mode, the sensor continuously measures the liquid level and distance, and the user can read the measurement results through the 485 interface at any time.
2. Every time the user initiates a 485 communication, the sensor will actively initiate a measurement and report the result.
3. Sleep mode, the product enters sleep mode, the user first wakes up the sensor through the 485 interface, and then initiates a measurement and obtains the result before the sensor sleeps again.
