Xi'an Kacise Optronics Co., Ltd.
TEL:86-29-88888109
Address::Tangyan South Road, Xi'an
Email: sales@kacise.com
Introduction of Paint mass flow meter
Paint mass flow meter consist of mass flow sensor and mass flow transmitter. It does not measure the volume per unit time (e.g., cubic meters per second) passing through the device, but measures the mass per unit time (e.g., kilograms per second) flowing through the device. The result of volumetric meter varies with temperature, pressure, composition, etc., but mass flow meter does not have such problem.
Operating principle of Paint mass flow meter
Paint mass flow meter is designed according to Coriolis Effect. The inlet arm and the outlet arm vibrate with the same frequency as the overall vibration, but when there is mass flow the two vibrations are out of sync: the inlet arm is behind, the outlet arm is ahead. The two vibrations are shifted in phase with respect to each other, and the degree of phase-shift is a measure for the amount of mass that is flowing through the tubes.
Application of mass flow meter
The KFM Coriolis flow meter family measures direct mass flow rates of liquids and gases in virtually all applications without special calibration. Safety, reliability, quality, and our innovative technologies enables us to provide a broad range of industry-specific products and services — and the expertise to put them to work for you.
Alternative Energy
Oil & Gas
Chemical
Food & Beverage
Industrial Energy
Life Sciences
Marine
Metals and Mining
Power
Pulp & Paper
Refining
Water & Wastewater
Others
Advantages of mass flow meter
1. High reliability
2. It requires low maintenance, because of no movable parts.
3. High accuracy: Generally, it is from 0.15%-0.3%.
4. It is not affected by the fluid, saving the design & installation cost.
5. It shows many parameter simultaneously, such as mass flow, temperature, density, etc.
6. Convenient installation: Generally, there is no specific requirement of choosing upstream or downstream pipe.
7. Wide application: Besides the common fluid, the mass flowmeter can measure other industrial media, such as non-Newtonian fluid, all kinds of slurry, suspensions, etc.
Instrument Selection
Code: KMF-1- Product Flowmeter selection | ||||||||||||
Code | DN/Measuring range | |||||||||||
1A | Diameter:3mm, 0-40kg/h | |||||||||||
1B | diameter:6mm, 0-100kg/h | |||||||||||
2A | diameter:8mm, 0-200kg/h | |||||||||||
3A | diameter:10mm, 0-5000kg/h | |||||||||||
3B | diameter:15mm, 0-1000kg/h | |||||||||||
4 | diameter:20mm, 0-3000kg/h | |||||||||||
5A | diameter:25mm, 0-10th/h | |||||||||||
5B | diameter:40mm, 0-20th/h | |||||||||||
6A | diameter:50mm, 0-30th/h | |||||||||||
6AB | diameter:65mm, 0-50th/h | |||||||||||
6B | diameter:80mm, 0-100th/h | |||||||||||
6C | diameter:100mm, 0-150th/h | |||||||||||
6CD | diameter:125mm, 0-200th/h | |||||||||||
6D | diameter:150mm, 0-500th/h | |||||||||||
6E | diameter:200mm, 0-800th/h | |||||||||||
6F | diameter:250mm, 0-1000th/h | |||||||||||
Code Transmitter output | ||||||||||||
A | 4-20mA(Instantaneous flow or density is optional); 0-10KHz(Instantaneous flow pulse signal); RS485 Modbus RTU; HART | |||||||||||
Code Transmitter housing | ||||||||||||
B | Die-cast aluminum alloy shell Wiring hole dimensions:M20*1.5 | |||||||||||
Code Pressure rating | ||||||||||||
16 | 1.6MPa | |||||||||||
40 | 4.0MPa | |||||||||||
xx | Special customization:using this letter to ask for the customization, please inform the pressure rating | |||||||||||
Code Temperature rating | ||||||||||||
A | -50~150℃ | |||||||||||
B | -50~250℃ | |||||||||||
C | -50~350℃ | |||||||||||
D | -200~150℃ | |||||||||||
Code Accuracy class | ||||||||||||
N | 0.20% | |||||||||||
M | 0.15% | |||||||||||
H | 0.10% | |||||||||||
Code Pressure link | ||||||||||||
F | Standard Flanges GB/T 9123.1-2000 ANSI Weld Neck Flanges-ANSI B16.5 | |||||||||||
W | Health type | |||||||||||
L | Welding thread | |||||||||||
T | Customization | |||||||||||
Code Inspection certificate | ||||||||||||
F | Factory standard:factory test certificate | |||||||||||
I | GB:third-party verification certificate | |||||||||||
Code Material | ||||||||||||
A | Measuring tube:316L | |||||||||||
C | Measuring tube:Hastelloy | |||||||||||
F | Measuring tube:inner wall spray PTFE(for large diameter) | |||||||||||
T | Special customization:using this letter to ask for the customization, please inform the pressure rating | |||||||||||
Code Transmitter | ||||||||||||
A | Integrated type | |||||||||||
B(XX) | Split type(cable length), with bracket | |||||||||||
Code Explosion-proof mark | ||||||||||||
A | Exd II CT5 Gb | |||||||||||
KMF-1- | 3b(0~800kg/h) | A | B | 40 | A | N | F | F | A | B(10) | A | Typical Orders information |